Availability: | |
---|---|
Quantity: | |
● Equipment parameters: a600
● Working voltage: DC48V
● Battery capacity: 4*100ah/150/200ahlithium battery
● Battery life: 4-5h
● The capacity of the dustbin: 155L
● Cleaning efficiency: 15000-18000m2/h
● Capacity of dust suppression water tank: rotomolded interior180l
● Operating power: 3020w
● Dust suction power: 500w*2
● Sweeping width: 2000mm
● Size of side brush: 4*500mm
● Length of main brush: 790*300mm
● Gradeability: ≤35°
● Operating noise: 60db(a)
● Power of the main brush motor: 950w
● Side brush motor: 4*90w
● Power of drive motor: 1200w
● Dust suction filtration area: 2*5m²
● Filter material: toray anti-static film
● Sweeping speed: 1-7km/h
● Turning radius: spin turn
● Type of braking: dual disc brakes on rear wheels
● Total weight of the machine: 670kg
● Dust-shaking motor: 120w*2
● Push rod motor: 4*20w
● Overall dimensions of the machine: 2600*1961*2051mm
● Packaging size: 2400*1850*2200mm
Configurations and Parameters:
1. The frame has double layers of anti-rust primer and is coated with electrostatic powder spraying for secondary surface finishing. It is rust-proof and anti-peeling. After coating, it has strong hardness. (Rust prevention process: degreaser before cutting - grinding - putty - epoxy zinc-rich primer (with zinc content of 40%) - powder electrostatic spraying).
2. Brushless external rotor DC fan with over-temperature protection, over-current protection, over-voltage protection, low-voltage protection, and locked rotor protection. (It has strong sealing performance, high speed, and large flow rate. (Our suction inlet is designed larger than that of competitors.) (The larger the flow rate, the more suction there is. The better the passability. It has undergone wind tunnel testing at the factory). Competitors use shaft rotation, while we use shell rotation.
3. The whole vehicle's wire control is designed by the Tongji Automotive Research Institute. It uses national standard wires, waterproof plugs, flame-retardant wire conduits, and well-known electrical components. The wires are stripped by a wire stripping machine. (The whole vehicle's wire control is designed and produced according to passenger car standards).
4. Dual braking system: electronic brake (adjustable braking distance), mechanical brake (double disc brake), and anti-rollback function.
5. Mingzun DC brushless motor differential rear axle (stable current, no need to change carbon brushes, variable speed through a differential), combined with Kelly engineering vehicle controller, with strong power. Easily climb a 30-degree slope (15-degree ground angle) and designed with anti-rollback function.
6. Engineering vehicle steering wheel, Taiwan waterproof switch, 3M adhesive panel sticker, engineering vehicle accelerator, and waterproof plugs for the whole vehicle.
7. Dust cover and sealing ring design: It can not only preserve grease but also prevent foreign matters such as dust from entering the bearing and keep the rolling elements running in a clean environment.
8. Standard high-pressure water gun with multi-purpose functions of sprinkling, dust control, and flushing.
9. The water tank is made of imported PE (modified material) and is produced by rotational molding process. It is more environmentally friendly and does not fade outdoors.
10. The rear wheel side plate is designed with double thickened steel plates.
11. Dual suction and dual dust-shaking design effectively improve the cleaning efficiency.
12. Front side brush: mechanical tube design, freely adjustable up and down height, easily solving dust, fallen leaves and other garbage on corners, steps and roads.
13. The product has: CE certification, quality inspection report, and three-system certification.